Posted by on | Featured
You are here:
< Back

Brightsign wifi connection

 

Configuration with USB Keyboard

  • If You used the device before with wallboard client,
    You need to factory reset it and remove everything from the sd card, or the device will start wallboard client after reset.
  • Grab a keyboard and connect it to the device.
  • Turn on the Device and insert an empty sd card to the Brightsign and the setup screen will appear.
  • Select next

  • Select Wifi

  • Choose the SSID and write in the Security key then select Next-Network Diagnostics.
  • Take out the SD card and copy Wallboard brightsign client files to it. Put back the SD card.
  • Reboot the device.
  • Wallboard client will start now with wifi connection.

 

Configuration with Diagnostic Web Server:

  • If You used the device before with wallboard client,
    You need to factory reset it and remove everything from the sd card, or the device will start wallboard client after reset.
  • Turn on the Device and insert an empty sd card to the Brightsign and the setup screen will appear.
  • Connect the device to the internet via ethernet, open browser on a computer and login to the Diagnostic Web Server of the device.
  • Diagnostic Web Server login: Url:Device ip. username:admin. password:Serial number of Brightsign device.
  • On the webadmin You will see that it shows the device setup.
  • Select next

  • Select Wifi

  • Choose the SSID and write in the Security key then select Next-Network Diagnostics.

  • Take out the SD card and copy Wallboard brightsign client files to it. Put back the SD card.
  • Reboot the device and remove ethernet cable.
  • Wallboard client will start now with wifi connection.
Comments are closed.