You are here:
< Back

Our Samsung SSSP6 Client is a web based application, which runs on Samsung Smart Signage devices with Tizen 4.0 operating system.

An example for a compatible device is model QB49N.

The installation process only requires a few steps.

Before installation the application, it is advised to do the following steps:

  • Press MENU on your remote controller
  • Reset System settings via System -> Reset System
  • Empty Storage via General -> Empty Storage
  • Set the time via System -> Time -> Clock Set

The following steps are required to be able to install the application:

  • Set the player type to URL Launcher via System -> Play via
  • Press the HOME button on the remote controller
  • Select URL Launcher Settings option
  • Select the URL Launcher option
  • The application installs and when the installation is completed, the application will run automatically.
  • In the application, first you need to type the the server URL. You can enter to input mode via pressing one of the arrow buttons on the remote controller. When you finish typing, you can set the server by pressing the Done button on the virtual keyboard. If you exit input mode, you can reenter to it by pressing the Enter button on the remote controller.
  • On successful connection, the following screen will come up. On the bottom left corner a 4 characters long activation code can be found. On the website, you can add the device with this activation code.

 Installing from USB device

  • Download the latest version of the application from https://development.wallboard.info/api/storage/update/samsung/samsungClient.zip
  • Extract the archive and copy the SSSP folder to a USB device.

After you plugged in the USB device to your SSSP6 device, select Install from USB Device option and then set the security pin (default is 0000). You need to set this only once.

  • The application installs and when the installation is completed, the application will run automatically.
  • In the application, first you need to type the the server URL. You can enter to input mode via pressing one of the arrow buttons on the remote controller. When you finish typing, you can set the server by pressing the Done button on the virtual keyboard. If you exit input mode, you can reenter to it by pressing the Enter button on the remote controller.

On successful connection, the following screen will come up. On the bottom left corner a 4 characters long activation code can be found. On the website, you can add the device with this activation code.

Comments are closed.